{"id":46,"date":"2026-09-27T00:32:57","date_gmt":"2026-09-27T00:32:57","guid":{"rendered":"https:\/\/viva-floors.com\/preventing-height-gaps-in-flooring-transitions"},"modified":"2026-10-15T02:33:17","modified_gmt":"2026-10-15T02:33:17","slug":"preventing-height-gaps-in-flooring-transitions","status":"publish","type":"post","link":"https:\/\/viva-floors.com\/es\/preventing-height-gaps-in-flooring-transitions\/","title":{"rendered":"Preventing Height Gaps in Flooring Transitions"},"content":{"rendered":"<div class=\"gr-content\"><h2 id=\"table-of-contents\">Table of Contents<\/h2>\n<ul><li><a href=\"#why-height-gaps-happen-in-flooring-transitions\">Why Height Gaps Happen in Flooring Transitions<\/a><\/li><li><a href=\"#how-to-level-subfloor-for-different-flooring-heights\">How to Level Subfloor for Different Flooring Heights<\/a><ul><li><a href=\"#measuring-thickness-variance-between-materials\">Measuring Thickness Variance Between Materials<\/a><\/li><li><a href=\"#calculated-subfloor-buildup-for-a-flush-transition\">Calculated Subfloor Buildup for a Flush Transition<\/a><\/li><\/ul><\/li><li><a href=\"#flooring-transition-strips-types-and-how-to-choose\">Flooring Transition Strips Types and How to Choose<\/a><ul><li><a href=\"#a-visual-decision-path-for-choosing-the-right-profile\">A Visual Decision Path for Choosing the Right Profile<\/a><\/li><li><a href=\"#matching-strip-material-to-the-floor-it-touches\">Matching Strip Material to the Floor It Touches<\/a><\/li><li><a href=\"#height-delta-cheat-sheet-by-material-pair\">Height Delta Cheat Sheet by Material Pair<\/a><\/li><li><a href=\"#t-molding-vs-reducer-vs-threshold-plate\">T-Molding vs. Reducer vs. Threshold Plate<\/a><\/li><\/ul><\/li><li><a href=\"#installation-steps-to-prevent-gaps\">Installation Steps to Prevent Gaps<\/a><ul><li><a href=\"#adhesive-vs-track-systems\">Adhesive vs. Track Systems<\/a><\/li><\/ul><\/li><li><a href=\"#what-to-do-if-flooring-planks-start-separating-in-winter\">What to Do If Flooring Planks Start Separating in Winter<\/a><ul><li><a href=\"#why-winter-gaps-open-the-mechanism\">Why Winter Gaps Open, The Mechanism<\/a><\/li><li><a href=\"#humidity-targets-that-prevent-winter-gaps\">Humidity Targets That Prevent Winter Gaps<\/a><\/li><li><a href=\"#what-to-do-when-gaps-appear\">What to Do When Gaps Appear<\/a><\/li><li><a href=\"#when-a-winter-gap-is-actually-a-transition-problem\">When a Winter Gap Is Actually a Transition Problem<\/a><\/li><li><a href=\"#preventing-next-winters-gaps\">Preventing Next Winter&#8217;s Gaps<\/a><\/li><\/ul><\/li><li><a href=\"#long-term-maintenance-and-moisture-control\">Long-Term Maintenance and Moisture Control<\/a><\/li><li><a href=\"#frequently-asked-questions\">Frequently Asked Questions<\/a><\/li><\/ul>\n<p><em>Last Updated: September 27, 2026<\/em><\/p>\n<h2 id=\"why-height-gaps-happen-in-flooring-transitions\">Why Height Gaps Happen in Flooring Transitions<\/h2>\n<p>Preventing height gaps in flooring transitions starts with one fact: no two flooring materials are the same thickness. A typical <a href=\"\/es\/products\/\">hardwood plank<\/a> runs about 3\/4 inch thick, while many vinyl planks sit closer to 5 millimeters. That difference has to go somewhere, and if you ignore it, you get a lip at the doorway that catches socks, trips feet, and collects dirt for years.<\/p>\n<p>So why do transitions fail?<\/p>\n<ul>\n<li><strong>Thickness variance<\/strong> between materials that meet at a doorway<\/li>\n<li><strong>Subfloor<\/strong> that isn&#8217;t flat, level, or both<\/li>\n<li><strong>Expansion gaps<\/strong> that get filled too tight, forcing planks to lift<\/li>\n<li>Missing or wrong <strong>transition strip<\/strong> for the height change<\/li>\n<li>Seasonal movement that opens seams as indoor humidity swings<\/li>\n<\/ul>\n<h2 id=\"how-to-level-subfloor-for-different-flooring-heights\">How to Level Subfloor for Different Flooring Heights<\/h2>\n<p>The best way to level a subfloor for different flooring heights is to measure each finished floor height, find the difference, and build up the lower side to match. You are not leveling the subfloor to the horizon. You are leveling it to the height of the thicker floor next door.<\/p>\n<h3 id=\"measuring-thickness-variance-between-materials\">Measuring Thickness Variance Between Materials<\/h3>\n<p>Start with real numbers, not guesses. Measure the actual installed thickness of each material, including underlayment and adhesive.<\/p>\n<ul>\n<li><strong>Laminate flooring:<\/strong> measure plank plus foam underlayment<\/li>\n<li><strong>Vinyl plank:<\/strong> often 4mm to 8mm, check the box<\/li>\n<li><strong>Hardwood installation:<\/strong> 3\/4 inch is common for solid; engineered runs thinner<\/li>\n<li><strong><a href=\"\/es\/products\/\">Azulejo<\/a>:<\/strong> tile thickness plus thinset plus backer board<\/li>\n<li><strong>Carpet:<\/strong> pile height plus pad, measured compressed<\/li>\n<\/ul>\n<h3 id=\"calculated-subfloor-buildup-for-a-flush-transition\">Calculated Subfloor Buildup for a Flush Transition<\/h3>\n<p>Here&#8217;s the method most guides skip. Say your tile assembly finishes at 1 inch and your vinyl plank finishes at 1\/4 inch. You need 3\/4 inch of buildup under the vinyl side.<\/p>\n<ul>\n<li>Under 1\/4 inch: leveling compound or a thicker underlayment<\/li>\n<li>1\/4 to 3\/4 inch: plywood sheets cut to fit, screwed down<\/li>\n<li>Over 3\/4 inch: framed buildup or a reducer transition instead<\/li>\n<\/ul>\n<h2 id=\"flooring-transition-strips-types-and-how-to-choose\">Flooring Transition Strips Types and How to Choose<\/h2>\n<p>The right transition strip depends on the height difference and the two materials meeting. Pick the profile first, then the finish. Most guides stop at a table. The problem is that a table tells you what exists, not what to grab off the shelf for your specific doorway. Use the decision logic below instead.<\/p>\n<figure class=\"article-content-image my-8\"><img decoding=\"async\" src=\"https:\/\/cdn.grandranker.com\/articles\/preventing-height-gaps-in-flooring-transitions-content-1-1790469176.jpg\" alt=\"Diagram comparing T-molding, reducer, and threshold flooring transitions with measured dimensions on a workbench.\" class=\"w-full rounded-lg shadow-lg\" loading=\"lazy\"><figcaption class=\"text-sm text-gray-600 mt-2 text-center\">Diagram comparing T-molding, reducer, and threshold flooring transitions with measured dimensions on a workbench.<\/figcaption><\/figure>\n\n<table style=\"width:100%;border-collapse:collapse;margin:2rem 0;font-size:14px;line-height:1.6\">\n<thead style=\"background-color:#f8f9fa;color:#111827;padding:12px 16px;text-align:left;font-weight:600;border-bottom:2px solid #e5e7eb\">\n<tr>\n<th style=\"background-color:#f8f9fa;color:#111827;padding:12px 16px;text-align:left;font-weight:600;border-bottom:2px solid #e5e7eb\">Strip Type<\/th>\n<th style=\"background-color:#f8f9fa;color:#111827;padding:12px 16px;text-align:left;font-weight:600;border-bottom:2px solid #e5e7eb\">Best For<\/th>\n<th style=\"background-color:#f8f9fa;color:#111827;padding:12px 16px;text-align:left;font-weight:600;border-bottom:2px solid #e5e7eb\">Height Difference<\/th>\n<th style=\"background-color:#f8f9fa;color:#111827;padding:12px 16px;text-align:left;font-weight:600;border-bottom:2px solid #e5e7eb\">Typical Profile Width<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"padding:12px 16px;border-bottom:1px solid #e5e7eb\">T-molding<\/td>\n<td style=\"padding:12px 16px;border-bottom:1px solid #e5e7eb\">Two floors at the same height<\/td>\n<td style=\"padding:12px 16px;border-bottom:1px solid #e5e7eb\">0 to 1\/16 inch<\/td>\n<td style=\"padding:12px 16px;border-bottom:1px solid #e5e7eb\">1-3\/4 to 2 inches<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 16px;border-bottom:1px solid #e5e7eb\">Reducer<\/td>\n<td style=\"padding:12px 16px;border-bottom:1px solid #e5e7eb\">One floor lower than the other<\/td>\n<td style=\"padding:12px 16px;border-bottom:1px solid #e5e7eb\">1\/8 to 1\/2 inch<\/td>\n<td style=\"padding:12px 16px;border-bottom:1px solid #e5e7eb\">1-1\/2 to 2-1\/4 inches<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 16px;border-bottom:1px solid #e5e7eb\">Threshold plate<\/td>\n<td style=\"padding:12px 16px;border-bottom:1px solid #e5e7eb\">Doorways, tile-to-wood<\/td>\n<td style=\"padding:12px 16px;border-bottom:1px solid #e5e7eb\">1\/4 to 1 inch<\/td>\n<td style=\"padding:12px 16px;border-bottom:1px solid #e5e7eb\">2 to 4 inches<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 16px;border-bottom:1px solid #e5e7eb\">End cap<\/td>\n<td style=\"padding:12px 16px;border-bottom:1px solid #e5e7eb\"><a href=\"\/es\/products\/\">Alfombra<\/a> to hard surface<\/td>\n<td style=\"padding:12px 16px;border-bottom:1px solid #e5e7eb\">Varies by pile<\/td>\n<td style=\"padding:12px 16px;border-bottom:1px solid #e5e7eb\">1-1\/4 to 1-3\/4 inches<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 16px;border-bottom:1px solid #e5e7eb\">Stair nose<\/td>\n<td style=\"padding:12px 16px;border-bottom:1px solid #e5e7eb\">Step-down edges<\/td>\n<td style=\"padding:12px 16px;border-bottom:1px solid #e5e7eb\">Full step<\/td>\n<td style=\"padding:12px 16px;border-bottom:1px solid #e5e7eb\">1-1\/4 to 2 inches<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3 id=\"a-visual-decision-path-for-choosing-the-right-profile\">A Visual Decision Path for Choosing the Right Profile<\/h3>\n<p>Work through these questions in order. The first &#8220;yes&#8221; is your answer.<\/p>\n<ol>\n<li><strong>Is the height difference 1\/16 inch or less?<\/strong> \u2192 T-molding. It bridges two surfaces of equal height and hides the seam without a slope.<\/li>\n<li><strong>Is the difference between 1\/8 and 1\/2 inch?<\/strong> \u2192 Reducer. It slopes from the higher floor down to the lower one, so feet don&#8217;t catch an edge.<\/li>\n<li><strong>Is the difference between 1\/4 and 1 inch, and the seam sits in a doorway?<\/strong> \u2192 Threshold plate. Flat and wide, it spans the gap and takes foot traffic without flexing.<\/li>\n<li><strong>Is one side carpet?<\/strong> \u2192 End cap. The profile tucks the carpet edge and meets the hard surface flush.<\/li>\n<li><strong>Is one side a step-down?<\/strong> \u2192 Stair nose. It wraps the edge and gives a finished look.<\/li>\n<\/ol>\n<h3 id=\"matching-strip-material-to-the-floor-it-touches\">Matching Strip Material to the Floor It Touches<\/h3>\n<p>Match the strip material to the floor it touches. A wood reducer against vinyl plank looks off. A metal threshold in a carpeted bedroom feels cold. Here&#8217;s the practical pairing:<\/p>\n<ul>\n<li><strong>Wood or wood-look strips<\/strong> against hardwood, laminate, and engineered plank<\/li>\n<li><strong>Metal (aluminum or brass)<\/strong> against tile, stone, and commercial-grade vinyl<\/li>\n<li><strong>Vinyl or PVC strips<\/strong> against luxury vinyl plank and sheet vinyl<\/li>\n<li><strong>Carpet-friendly end caps<\/strong> with a metal or wood face and a carpet tuck channel<\/li>\n<\/ul>\n<h3 id=\"height-delta-cheat-sheet-by-material-pair\">Height Delta Cheat Sheet by Material Pair<\/h3>\n<p>Use these common finished heights to estimate your delta before you measure. Actual numbers vary by product, so verify with a tape measure.<\/p>\n<ul>\n<li><strong>Solid hardwood (3\/4 inch) meeting vinyl plank (5mm, about 3\/16 inch):<\/strong> delta near 9\/16 inch \u2192 reducer<\/li>\n<li><strong>Tile with thinset and backer board (about 1 inch) meeting laminate with underlayment (about 1\/2 inch):<\/strong> delta near 1\/2 inch \u2192 reducer or threshold plate<\/li>\n<li><strong>Engineered hardwood (1\/2 inch) meeting carpet with pad (about 3\/4 inch compressed):<\/strong> delta near 1\/4 inch \u2192 end cap or reducer<\/li>\n<li><strong>Two vinyl plank floors of the same thickness:<\/strong> delta near 0 \u2192 T-molding<\/li>\n<\/ul>\n<div style=\"margin:1.5rem 0;padding:16px 20px;background-color:#f0f9ff;border-left:4px solid #bae6fd;border-radius:0 8px 8px 0\">\n<strong style=\"display:block;margin-bottom:4px;color:#111827;font-size:14px\"> Pro Tip<\/strong>\n<span style=\"color:#374151;font-size:15px;line-height:1.6\">Measure the finished height of each floor at the doorway, not in the middle of the room. Subfloor dips and humps change the delta by as much as 1\/8 inch over a few feet.<\/span>\n<\/div>\n<h3 id=\"t-molding-vs-reducer-vs-threshold-plate\">T-Molding vs. Reducer vs. Threshold Plate<\/h3>\n<p><strong>T-molding<\/strong> bridges two surfaces of equal height. It has a T-shaped <strong>moulding profile<\/strong> that sits in the gap and covers both edges.<\/p>\n<h2 id=\"installation-steps-to-prevent-gaps\">Installation Steps to Prevent Gaps<\/h2>\n<p>Follow these steps in order. Skipping one is how gaps come back.<\/p>\n<ol>\n<li><strong>Measure the height differential<\/strong> at three points across the doorway<\/li>\n<li><strong>Level or build up the subfloor<\/strong> until surfaces are within 1\/16 inch<\/li>\n<li><strong>Leave the expansion gap<\/strong> at each wall and edge, per the flooring maker&#8217;s spec<\/li>\n<li><strong>Dry-fit the transition strip<\/strong> before cutting<\/li>\n<li><strong>Cut with a miter saw<\/strong> for a clean, square edge<\/li>\n<li><strong>Set the strip<\/strong> with adhesive or a track system<\/li>\n<li><strong>Weight or tape it down<\/strong> for the full cure time<\/li>\n<\/ol>\n<h3 id=\"adhesive-vs-track-systems\">Adhesive vs. Track Systems<\/h3>\n<p><strong>Construction adhesive<\/strong> gives a permanent bond. It works well for threshold plates and reducers that won&#8217;t move. The downside: removal later means prying and scraping.<\/p>\n<h2 id=\"what-to-do-if-flooring-planks-start-separating-in-winter\">What to Do If Flooring Planks Start Separating in Winter<\/h2>\n<p>Planks that separate in winter are usually drying out, not failing. Indoor humidity drops when heaters run, wood and laminate shrink, and seams open at the ends. The same shrinkage that opens plank seams can also open the gap under a transition strip, because the strip is anchored to a floor that is moving.<\/p>\n<h3 id=\"why-winter-gaps-open-the-mechanism\">Why Winter Gaps Open, The Mechanism<\/h3>\n<p>Wood and laminate are hygroscopic. They absorb moisture from the air and release it as humidity falls. When indoor relative humidity drops from a summer 50% to a winter 25%, a plank can shrink across its width by roughly 1\/32 inch per foot of width. On a 6-inch-wide plank, that&#8217;s small. Across a 20-foot room, the cumulative movement at the perimeter can be 1\/4 inch or more, enough to pull a transition strip loose or open a visible seam at the doorway.<\/p>\n<h3 id=\"humidity-targets-that-prevent-winter-gaps\">Humidity Targets That Prevent Winter Gaps<\/h3>\n<ul>\n<li><strong>Aim for 35% to 55% relative humidity year-round.<\/strong> Most flooring manufacturers specify this range in their warranty terms.<\/li>\n<li><strong>Measure with a hygrometer<\/strong>, not a guess. Inexpensive digital hygrometers are widely available.<\/li>\n<li><strong>Run a humidifier<\/strong> in the driest rooms. Whole-home humidifiers tied to the HVAC system hold the range better than portable units.<\/li>\n<li><strong>Avoid over-humidifying.<\/strong> Above 60%, planks can swell and buckle at the seams.<\/li>\n<\/ul>\n<h3 id=\"what-to-do-when-gaps-appear\">What to Do When Gaps Appear<\/h3>\n<ol>\n<li><strong>Check the indoor humidity first.<\/strong> If it&#8217;s below 35%, that&#8217;s your cause.<\/li>\n<li><strong>Run a humidifier<\/strong> and give the floor two to four weeks to re-acclimate.<\/li>\n<li><strong>Do not caulk the seams shut.<\/strong> The floor needs to move back. Caulk traps stress and causes buckling when humidity returns.<\/li>\n<li><strong>Do not force planks together<\/strong> with putty or filler. Same reason.<\/li>\n<li><strong>Wait for spring.<\/strong> Many gaps close on their own as humidity returns.<\/li>\n<li><strong>If gaps stay open past spring<\/strong>, call a pro to check for a subfloor or acclimation problem.<\/li>\n<\/ol>\n<h3 id=\"when-a-winter-gap-is-actually-a-transition-problem\">When a Winter Gap Is Actually a Transition Problem<\/h3>\n<p>A gap at the doorway is not always seasonal. Distinguish between the two:<\/p>\n<ul>\n<li><strong>Seasonal gap:<\/strong> opens in winter, closes in summer, runs along plank ends or edges, and follows the humidity curve.<\/li>\n<li><strong>Transition gap:<\/strong> stays open year-round, appears at the seam between two flooring materials, and often shows a loose or rocking strip.<\/li>\n<\/ul>\n<div style=\"margin:1.5rem 0;padding:16px 20px;background-color:#fffbeb;border-left:4px solid #fde68a;border-radius:0 8px 8px 0\">\n<strong style=\"display:block;margin-bottom:4px;color:#111827;font-size:14px\"> Watch Out<\/strong>\n<span style=\"color:#374151;font-size:15px;line-height:1.6\">Never fill a seasonal plank gap with wood filler or caulk. The floor will swell in summer and buckle against the filler, causing a bigger repair than the original gap.<\/span>\n<\/div>\n<h3 id=\"preventing-next-winters-gaps\">Preventing Next Winter&#8217;s Gaps<\/h3>\n<ul>\n<li><strong>Acclimate flooring to the home&#8217;s average humidity<\/strong> before installation, per the manufacturer&#8217;s spec.<\/li>\n<li><strong>Leave the expansion gap<\/strong> at walls and transitions. A tight strip plus a shrinking floor equals a lifted seam.<\/li>\n<li><strong>Keep humidity stable<\/strong> through the heating season with a humidifier and a hygrometer.<\/li>\n<li><strong>Re-check transition strips each fall<\/strong> before the dry season starts, and tighten track screws or re-adhere loose profiles.<\/li>\n<\/ul>\n<p><a href=\"https:\/\/nwfa.org\/wp-content\/uploads\/2026\/02\/NWFA-Installation-Guidelines.pdf\">review humidity and acclimation guidance from the National Wood Flooring Association<\/a><\/p>\n<h2 id=\"long-term-maintenance-and-moisture-control\">Long-Term Maintenance and Moisture Control<\/h2>\n<p>Transitions last when the floor under them stays stable. Keep these habits going:<\/p>\n<ul>\n<li><strong>Re-seal or re-tape<\/strong> thresholds every few years in high-traffic doorways<\/li>\n<li><strong>Wipe up spills<\/strong> at transitions fast, especially near tile and wood<\/li>\n<li><strong>Check for movement<\/strong> each season and tighten track screws if needed<\/li>\n<li><strong>Add acoustic underlayment<\/strong> under floating floors to cut noise transfer between rooms<\/li>\n<li><strong>Use a moisture barrier<\/strong> over concrete slabs before any hard surface goes down<\/li>\n<\/ul>\n<section style=\"margin:3rem 0 2rem 0\">\n<h2 style=\"font-size:1.5rem;font-weight:700;margin:0 0 4px 0\" id=\"frequently-asked-questions\">Frequently Asked Questions<\/h2>\n<div style=\"padding:20px 0;border-bottom:1px solid #e5e7eb\">\n<h3 style=\"font-size:1.1rem;font-weight:600;margin:0 0 8px 0\">What is the best way to transition between different height floors?<\/h3>\n<div style=\"line-height:1.7;font-size:0.95rem\">\n<p style=\"margin:0\">The best method depends on the height difference. For gaps under 12 mm, a transition strip like T-molding or a reducer often works. Larger gaps may need subfloor leveling compound or a custom ramp. Always measure the exact height differential first, then choose a moulding profile that bridges it without creating a trip hazard. If you are unsure, a flooring professional can recommend the right strip for your specific materials.<\/p>\n<\/div>\n<\/div><div style=\"padding:20px 0;border-bottom:1px solid #e5e7eb\">\n<h3 style=\"font-size:1.1rem;font-weight:600;margin:0 0 8px 0\">Can you use subfloor leveling compound to fix height gaps?<\/h3>\n<div style=\"line-height:1.7;font-size:0.95rem\">\n<p style=\"margin:0\">Yes, self-leveling compound can correct minor subfloor unevenness, but it is not a substitute for structural fixes. If the height difference between two flooring materials is more than a few millimeters, leveling compound alone will not solve the transition gap. You may need to add a plywood underlayment or use a thicker transition strip. Always check the compound&#8217;s maximum thickness rating and let it cure fully before installing flooring.<\/p>\n<\/div>\n<\/div><div style=\"padding:20px 0;border-bottom:1px solid #e5e7eb\">\n<h3 style=\"font-size:1.1rem;font-weight:600;margin:0 0 8px 0\">When should you use a T-molding versus a reducer?<\/h3>\n<div style=\"line-height:1.7;font-size:0.95rem\">\n<p style=\"margin:0\">Use T-molding when two floors are nearly the same height (within 3-5 mm) and you need a seamless transition. Choose a reducer when one floor is noticeably higher, as it creates a gradual slope that prevents tripping. For large height differences over 12 mm, a threshold plate or custom ramp may be necessary. Matching the moulding profile to your flooring thickness ensures a flush, professional finish.<\/p>\n<\/div>\n<\/div><div style=\"padding:20px 0;border-bottom:1px solid #e5e7eb\">\n<h3 style=\"font-size:1.1rem;font-weight:600;margin:0 0 8px 0\">What causes flooring planks to separate in winter?<\/h3>\n<div style=\"line-height:1.7;font-size:0.95rem\">\n<p style=\"margin:0\">Winter air is dry, so wood and laminate planks lose moisture and shrink. If they were installed tight without an expansion gap, the shrinking pulls seams apart. To fix it, you can try a humidifier to stabilize indoor humidity, or gently tap planks back together if the gap is small. For persistent separation, a flooring professional may need to reinstall the affected rows with proper expansion space.<\/p>\n<\/div>\n<\/div>\n<\/section>\n<hr>\n<p>Height gaps in flooring transitions come down to math, moisture, and matching the right strip to the job. Get the subfloor buildup right, leave room for movement, and pick a profile that fits the height difference. If you&#8217;d rather not guess, Viva Floors &amp; More offers expert consultation, a huge in-stock selection from trusted brands, and help for both DIYers and contractors. Request an estimate and get your transitions right the first time.<\/p>\n\n<div class=\"cta-button-container\" style=\"text-align: center;margin: 32px 0\">\n    \n    <a href=\"\/es\/\" class=\"cta-button\" style=\"display: inline-block;background-color: #f37628;color: #111827;padding: 14px 32px;border-radius: 8px;text-decoration: none;font-weight: 600;font-size: 16px\">Request Estimate<\/a>\n<\/div><\/div>","protected":false},"excerpt":{"rendered":"<p>Preventing height gaps in flooring transitions starts with one fact: no two flooring materials are the same thickness. A typical hardwood plank runs about 3\/4 inch thick, while many vinyl planks sit closer to 5 millimeters.\u2026<\/p>","protected":false},"author":1,"featured_media":47,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[11],"tags":[],"class_list":["post-46","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-flooring-tips"],"_links":{"self":[{"href":"https:\/\/viva-floors.com\/es\/wp-json\/wp\/v2\/posts\/46","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/viva-floors.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/viva-floors.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/viva-floors.com\/es\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/viva-floors.com\/es\/wp-json\/wp\/v2\/comments?post=46"}],"version-history":[{"count":3,"href":"https:\/\/viva-floors.com\/es\/wp-json\/wp\/v2\/posts\/46\/revisions"}],"predecessor-version":[{"id":281,"href":"https:\/\/viva-floors.com\/es\/wp-json\/wp\/v2\/posts\/46\/revisions\/281"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/viva-floors.com\/es\/wp-json\/wp\/v2\/media\/47"}],"wp:attachment":[{"href":"https:\/\/viva-floors.com\/es\/wp-json\/wp\/v2\/media?parent=46"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/viva-floors.com\/es\/wp-json\/wp\/v2\/categories?post=46"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/viva-floors.com\/es\/wp-json\/wp\/v2\/tags?post=46"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}